Zoom GFX-8 Spezifikationen PDF herunterladen (Seite 39)

MIDI Usage Examples

Connect the MIDI OUT connector of the GFX-8 to the

MIDI IN connector of the external MIDI device (other

GFX- 8, MIDI sequencer, etc.).

Set the GFX-8 to play mode and turn the PARM

SELECT knob until the GROUP/BANK indicator shows

"15".

Use the PARM VALUE knob to select the data type to

use for the bulk dump operation.

• ALL All settings of GFX-8

• PAT All patch data

• SYS All settings of GFX-8 except patch data

• BUF Currently selected patch

• DST DRIVE module user custom settings

After setting the external MIDI device to the recording

mode, press the STORE key.

For example, when "ALL" was selected in step 3, the display

shows "ALL OK?".

To execute the bulk dump operation, press the

STORE key once more.

The display shows "DUMPING" and the GFX-8 starts to send the

bulk dump data. To cancel the bulk dump operation, press the

EDIT/CANCEL key before pressing the STORE key the

second time. The unit returns to the play mode without

carrying out the operation.

When the GFX-8 has returned to play mode, stop

recording at the external MIDI device.

Perform any necessary steps to store the recorded information on

the external MIDI device.

switch is operated at the GFX-8.

3. When the setting is complete, press the EDIT key to

return to play mode.

When panel keys or switches are operated in this condition,

the respective control change is output from the MIDI OUT

connector. When a control change message is received from

external equipment, the respective item changes. The values

that can be received for the various items are listed below.

Example:

Control number 70 is assigned to DRIVE module on/off

When the DRIVE module is switched on or off at the GFX-8

itself, the MIDI OUT connector supplies the following control

change information: control number = 70, value = 127/0.

When the control change information "control number = 70,

value = 127/0" is supplied to the GFX-8 MIDI IN connector, the

DRIVE module is switched OFF. When the control change

information "control number = 70, value = 64 - 127" is supplied, the

DRIVE module is switched ON.

While the jam play function or sampler function is

activated, external MIDI control is not possible.

NOTE

Patch information and program change map information stored in the GFX-8 can be output in bulk via the MIDI link. This function

is called "bulk dump". You can use this function for example to store GFX-8 information on a MIDI sequencer or to exchange

settings between two GFX-8 units.

ZOOM GFX-8

Bulk Dump

Allowable values Allowable values

EXPP

0 - 127 Continuously variable

0=OFF/127=ON

When pushed: 127 = ON value output

Immediately after: 0 = OFF value output

When pushed: 127 = ON value output

When released: 0 = OFF value output

When pushed and LED lights:

127 = ON value output

When pushed and LED goes out:

O = OFF value output

0 - 63=OFF/64 - 127=ON

DRIVE/MOD DLY/REV/EQ

BYPAS/MUTE

CTSW

(when using push = ON function)

CTSW

(when using push = ON/OFF

toggle function)

(For tap input)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GFX-8 Spezifikationen Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumentenverstärker Zoom GFX-8