Zoom GFX-8 Spezifikationen PDF herunterladen (Seite 34)

Using the Sampler

Refer to the diagram on page 6 and connect the

recording source to the INPUT jack or AUX IN jack of

the GFX-8.

Before changing any connections, be sure to turn the

OUTPUT knob fully to zero. If plugs are inserted or

removed with the OUTPUT turned up, transient noise can

occur which can damage the speakers of the playback

system.

Select the patch in which you wish to use the sampler.

Switch to edit mode and select SAMPLER (effect 7B)

in the DLY/REV module (see page 27). Make sure that

the DLY/REV module is ON.

When SAMPLER is selected for the DLY/REV module, the

MOD module is automatically set to OFF.

Use PARM knobs 1 - 4 to select the sampler

parameters, as follows.

PARM knob 1

SOURCE parameter (recording source selection)

The following settings are available.

• PL = Guitar signal from INPUT jack (after passing EQ

module/amp simulator)

• AU = Signal from AUX IN jack (signal does not pass any

effect module)

PARM knob 2

PITCH parameter (pitch compensation)

Sets pitch compensation to ON (on) or OFF (oF). When the

PITCH parameter is ON, the pitch will be kept constant also

when changing the playback speed with the SPEED parameter

(PARM knob 3).

PARM knob 3

SPEED (playback speed)

Sets the sampler playback speed. When pitch compensation is not

carried out with the PITCH parameter, the pitch changes as

follows, according to the SPEED parameter.

• 1.0 original pitch

• 94, 89, 84, 79, 75, 71, 67

(1 semitone down - 7 semitones down)

•50 (1 octave down)

•25 (2 octaves down)

PARM knob 4

TONE

Adjusts the playback tone. Settings from -10 to -1 mean a low-

range cut and settings from 1 to 10 a high- range cut.

Store the patch and return to play mode.

For patches where SAMPLER is selected as effect for the

DLY/REV module, the DLY/REV key LED flashes green.

To activate the sampler, push the expression pedal

fully down in play mode, or press the CONTROL

switch in manual mode.

The following information appears on the display and the

indication "SM" flashes on the GROUP/BANK indicator.

Press the REC foot switch (foot switch 3) and play the

phrase you want to record (or start playback at the CD

player or other external device).

The indication "RECORDING" scrolls on the display and

recording starts.

To stop recording halfway, press the foot switch

(foot switch 2).

When the foot switch is pressed, playback starts

immediately from the beginning of the recorded phrase.

When the foot switch was not operated, recording stops

automatically after 25 seconds have elapsed, and playback

starts.

During playback, the display shows the following information.

When recording is complete, the foot switches 1 - 4 can be

used to perform the following operations.

foot switch (foot switch 1)

Rewind

foot switch (foot switch 2)

Playback start/stop

REC foot switch (foot switch 3)

Clear recorded phrase and start new recording

CONTROL switch (foot switch 4)

Terminate sampler mode

To terminate the sampler function, press the

expression pedal once more fully down, press the

EDIT key, or press the CONTROL switch.

The recorded contents are cleared when the sampler

function is terminated.

NOTE

Playing

Rewinding

Speed: 100 - 25

P: Pitch compensation ON

Space: Pitch compensation OFF

AUX: AUX selected as source

PLY: Guitar input selected as source

NOTE

The GFX-8 incorporates a sampler with a maximum recording duration of 25 seconds. It can be used not only to record the guitar

input but also the signal from an external component such as a CD player or similar. The recorded sample is stored in

memory and can be easily played back using the foot switches.

Using the Sampler

ZOOM GFX-8

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GFX-8 Spezifikationen Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumentenverstärker Zoom GFX-8