Zoom GFX-8 Spezifikationen PDF herunterladen (Seite 16)

Changing the Sound of a Patch (Edit Mode)

Use the DRIVE, MOD, DLY/REV, ZNR/EQ EDIT, or

TOTAL key to select the module you want to edit.

The selected key starts to flash.

Use the PARM knobs 1 - 4 to edit the parameter

selected in step 1.

In edit mode, the main parameters (parameter 1 - 4) of the

currently selected module are assigned to PARM knobs 1 - 4.

For example, when the effect OVER DRV of the

DRIVE module is selected, the PARM knobs 1 - 4

control the following parameters.

PARM knobs 1 - 4

GAIN PRE GAIN TONE LEVEL

Selects the effect of

the DRIVE module.

Selects the effect of the MOD module.

Selects the effect of

the DLY/REV module module.

[DRIVE/MOD/DLY/REV selector]

[GAIN knob]

[DRIVE/MOD/DLY/REV key]

Adjusts a major parameter

of the DRIVE module. In

almost all patches, this is

the GAIN parameter that

determines the distortion

intensity.

Respective module is OFF.

Module is ON and effect from group A (upper labels) is selected.

Key out or slowly flashing red

Key lit/flashing red

Module is ON and effect from group B (lower labels) is selected.

When the effect is switched, the name of the new effect is shown

on the display for about 2 seconds.

Key lit/flashing green

Switches the respective module (DRIVE, MOD, DLY/REV) ON and

OFF and switches the group for selectable effects. With each

push of the key, the unit cycles through the following three states.

ZOOM GFX-8

In edit mode, the following knobs and keys can be used to directly edit the effect selection or parameter.

Using PARM knobs 1 - 4, the main parameters of each module can be quickly edited.

Edit Mode Shortcut (1)

Edit Mode Shortcut (2)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GFX-8 Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumentenverstärker Zoom GFX-8