Zoom GFX-8 Spezifikationen PDF herunterladen (Seite 14)

Changing the Sound of a Patch (Edit Mode)

In play mode, select the patch you want to edit.

The patch can be from a user group or preset group. However,

because patches in the preset groups are read-only, after you have

edited a patch, you can only select a user group patch as store

target.

Press the EDIT key.

The EDIT key LED lights up, and the GFX-8 enters the edit

mode.

In edit mode, the following information is shown on the panel.

The keys and foot switch LEDs of modules that are ON in the

current patch are lit.

The key of the module selected for editing flashes.

When edit mode was activated immediately after switching

patches, the TOTAL key flashes. When edit mode was

activated after easy edit, the key of the edited module

flashes.

Use the panel keys to select the module you want to

edit.

In edit mode, the following keys serve to select the module for

editing. The selected key flashes.

If a module is selected that is set to OFF in the current

patch, editing is not possible (display shows "OFF").

However, ZNR settings can be made also when the EQ

module is OFF.

Use the PARM SELECT knob to select the parameter

you want to edit.

When you turn the PARM SELECT knob, the effects of the

module selected in step 3 and the effect parameters are shown in

turn on the display. (Which parameter is shown depends on

the currently selected module and effect). The currently

selected parameter setting can be checked using the

GROUP/BANK indicator.

NOTE

DRIVE, MOD, DLY/REV key

ZNR/EQ EDIT key

TOTAL key

MIDI key

Select the DRIVE, MOD, or

DLY/REV module respectively.

Make MIDI settings

(see page 35).

Selects the EQ module or ZNR.

With each push of the key, the color of the flashing LED

changes, and the edit target changes as follows.

Flashing red EQ module page 1

Flashing green EQ module page 2

Flashing orange ZNR

Flashing red Set patch name and patch level .

Flashing green Set RTM and CONTROL switch

functions (see page 30).

Flashing orange Make amp simulator (global

parameter) settings .

Serves to set the patch name and patch level (overall output

level of the patch) and other parameters applying to the entire

patch, as well as global parameters that apply to all patches.

With each push of the key, the color of the flashing LED

changes, and the edit target changes as follows.

HINTHINT

Currently selected parameter name

Currently selected parameter value

The condition where you can change the parameters that make up a patch to create your own sound is called "edit mode". This

section describes how to use edit mode.

Changing the Sound of a Patch (Edit Mode)

Basic Edit Mode Steps

ZOOM GFX-8

The basic steps that are normally taken in edit mode are explained here. Besides these, the edit mode also provides a short cut

to quickly edit a specific parameter (

see

page 16).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GFX-8 Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumentenverstärker Zoom GFX-8