Zoom GFX-8 Spezifikationen PDF herunterladen (Seite 35)

Before using the various possibilities, basic settings for sending

and receiving MIDI messages (Omni mode on/off, send/receive

channel, etc.) must be made, as described below. MIDI settings are

global parameters that apply to all patches. The settings are

memorized also when the unit is turned off.

In play mode or edit mode, press the MIDI key.

The MIDI key lights up, and the unit enters the MIDI utility

mode. The GROUP/BANK indicator shows the setting item

number, and the display shows the setting value.

Use the PARM SELECT knobs 1 - 4 to select the item,

and use the PARM VALUE knob to change the value.

Item numbers, setting contents, and setting values are listed

below.

01 RXCH (MIDI receive channel)

Setting value: 01 - 16

Sets the MIDI channel in which the GFX-8 receives

MIDI messages.

02 TXCH (MIDI send channel)

Setting value: 01 - 16

Sets the MIDI channel in which the GFX-8 sends MIDI

messages.

MIDI OUT/THR (MIDI OUT connector function)

Setting value: OUT, THR

Sets the function of the MIDI OUT connector to "OUT"

(MIDI OUT connector) or "THR" (MIDI THRU connector).

When wishing to transmit GFX-8 operation information to an

external device, select "OUT".

When MIDI THRU is selected, the GFX-8 will not send out

any MIDI messages, and all functions related to MIDI

message output are disabled.

When the settings are complete, press the EDIT key .

The settings are stored, and the unit returns to the play mode.

NOTE

Item name setting value Item number

This section describes various application examples of the GFX-8 using MIDI.

Basic MIDI Send/Receive Settings

MIDI Usage Examples

Switching GFX-8 Patches From an External Unit

ZOOM GFX-8

MIDI Usage Examples

You can send MIDI messages from an external MIDI device to the

GFX-8 and switch patches at the GFX-8 in this way. To do this,

connect the MIDI OUT connector of the external MIDI device to the

MIDI IN jack of the GFX-8, using a MIDI cable. Set the MIDI

send channel at the external MIDI device and the MIDI receive

channel (RXCH) at the GFX-8 to the same settings.

To switch patches, you can either use bank select + program

change information to switch the patch directly, or you can use the

program change map built into the GFX-8 to call up patches

indirectly.

Specifying Patches Directly

You can use bank select + program change messages to directly

specify any group, bank number, and patch number of the GFX-8.

Proceed as follows.

In play mode or edit mode, press the MIDI key.

The MIDI key lights up, and the unit enters the MIDI utility

mode.

Turn the PARM SELECT knob so that the

GROUP/BANK indicator shows "14".

The display shows "PC FIX" or "PC MAP".

If necessary, use the PARM VALUE knob so that the

display shows "PC FIX", and then press the EDIT key .

The GFX-8 returns to the play mode.

To switch GFX-8 patches under external control, send

messages in the following order.

• Bank select MSB (control change number: 0/value: 0)

• Bank select LSB (control change number: 32/value: 0 - 2)

• Program number (0 - 79)

The relationship between GFX-8 patches and bank select

MSB/bank select LSB/program number is as shown below.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GFX-8 Spezifikationen Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumentenverstärker Zoom GFX-8