Zoom Handy Recorder H4 Spezifikationen Seite 83

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 82
Miscellaneous Settings
ZOOM H4
83
HINT
If the H4 is connected to a computer while the
[POWER] switch of the H4 is off, power will be
automatically supplied via the USB connection
and the screen shown above will appear.
4.
Move the jog dial up/down to bring
the cursor to “CONNECT TO PC”,
and then press the jog dial.
The display changes as follows.
When the above display is shown, the H4 and the
computer are in the online condition, and the H4
is recognized as an external memory device,
allowing the computer to access the SD card.
You can now copy or delete files as needed.
5.
To terminate the connection, cancel
the online condition at the computer.
6.
To return to the stereo mode or
4-track mode top screen, press the
center of the [MENU] key.
NOTE
If you press the [MENU] key without terminating
the connection at the computer, the connection
will be forcibly terminated, and an error
indication will be shown at the computer. To
prevent corruption of files, be sure to terminate
the connection at the computer first.
If the H4 is being powered via the [USB] port,
pressing the center of the [MENU] key
repeatedly will cause the display to return to the
screen that was shown when the H4 started up
with USB power.
When you press the center of the [MENU] key
to terminate the connection to the computer
and return to the top screen, the unit will restart
in the condition as specified by the data saved
on the SD card.
SD card operations
This section explains various SD card operations.
Checking available space on the
SD card
To display the remaining capacity of the SD
card, proceed as follows.
1.
Verify that the recorder is stopped.
Then press the center of the [MENU]
key at the stereo mode or 4-track
mode top screen.
The main menu for miscellaneous settings of the
H4 appears.
2.
Move the jog dial up/down to bring
the cursor to “CARD”, and then press
the jog dial.
The CARD menu screen for various SD card
operations appears.
3.
Move the jog dial up/down to bring
the cursor to “REMAIN”, and then
press the jog dial.
The remaining capacity of the SD card is shown
as a bar graph, in MB (megabytes), and as
remaining recording time (hours/minutes/
seconds) converted to one track.
H4_E.book 83 ページ 2006年9月1日 金曜日 午後7時56分
Seitenansicht 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare