Zoom Handy Recorder H4 Spezifikationen PDF herunterladen (Seite 31)

Stereo Mode

ZOOM H4

31

3.

To switch to stereo mode, move the

jog dial up/down to bring the cursor

to "STEREO RECORDER" and then

press the jog dial.

The H4 switches to stereo mode and the

[MODE] indicator lights up.

The display automatically changes to the stereo

mode top screen.

HINT

When you switch from 4-track mode to stereo

mode, the project you were working on up to that

point will be automatically saved.

Recording in stereo mode

This section explains the steps required for

recording in stereo mode.

Select input source

You can select either the signal from the [INPUT

1]/[INPUT 2] jacks or the built-in stereo mic as

input source to be assigned to the stereo tracks.

1.

At the stereo mode top screen, press

the bottom (INPUT MENU) of the

[MENU] key.

The INPUT menu for making various input

related settings appears.

2.

Move the jog dial up/down to bring

the cursor to “SOURCE”, then press

the jog dial.

The input source can now be selected.

3.

Move the jog dial up/down to select

the input source.

The following selections are available.

4.

To confirm the input source

selection, press the jog dial.

5.

To return to the stereo mode top

screen, press the center of the

[MENU] key.

Adjust recording level

Perform these steps to optimize the level of the

signal sent to the stereo tracks.

1.

Select the input source as described

above.

When using the [INPUT 1]/[INPUT 2] jacks as

input source, verify that an external microphone

or other device is connected.

2.

Use the [MIC GAIN] switch (for the

built-in stereo mic) or the [INPUT 1

GAIN]/[INPUT 2 GAIN] switches (for

the [INPUT 1]/[INPUT 2] jacks) to

adjust the input sensitivity.

Display

Input source

MIC

Built-in stereo mic L/R

IN1&2

[INPUT 1]/[INPUT 2] jacks

H4_E.book 31 ページ２００６年９月１日　金曜日　午後７時５６分

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare