Zoom Handy Recorder H4 Spezifikationen PDF herunterladen (Seite 44)

4-Track Mode

ZOOM H4

Locate a point slightly before the

intended punch-in point, and press

the top (@

) of the [MENU] key.

When you come to the punch-in

point, press the [REC] key.

The [REC] key lights up, and track recording

begins from that location (punch-in).

When you come to the intended

punch-out point, press the [REC] key

once more.

The [REC] key goes out, and the H4 switches

from recording to playback (punch-out).

Press the top (@

) of the [MENU] key

to stop the recorder.

To check the results, use the locate

function to move to a point before

the punch-in point, and press the top

(

) of the [MENU] key.

◆

Auto punch-in/out

To automatically re-record only a part of an

audio track by specifying the punch-in/out points

beforehand, proceed as follows.

At the top screen, press one of the

TRACK [1] – [4] keys to select the

track you want to re-record.

The display shows the number of the selected

track.

Press the same TRACK [1] – [4] keys

that you pressed in step 1 repeatedly,

so that the key is lit in red.

The input signal can now be monitored. The

number of the track selected as recording target

is shown in reverse.

Locate the intended punch-in point.

Move the jog dial up/down to bring

the cursor to the A-PUNCH button.

Then press the jog dial.

The A-PUNCH button flashes, and the point is

set as the punch-in point where auto punch-in/out

will begin.

NOTE

In Always New mode, the A-PUNCH button is

grayed out and cannot be selected.

Locate the intended punch-out point

and bring the cursor to the A-PUNCH

button. Then press the jog dial.

The A-PUNCH button changes from flashing to

reverse, and the point is set as the punch-out

point where auto punch-in/out will end. When

auto punch-in/out is enabled, the TRACK key(s)

will flash while the recorder is before the punch-

in point and after the punch-out point.

NOTE

•To redo the punch-in/out point setting, bring

the cursor to the A-PUNCH button and press

the jog dial to return the button indication to the

original condition. Then repeat steps 3 – 5.

Input

signal level

-PUNCH

button

H4_E.book 44 ページ２００６年９月１日　金曜日　午後７時５６分

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom Handy Recorder H4 Spezifikationen Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte Zoom Handy Recorder H4