Zoom Handy Recorder H4 Spezifikationen Seite 24

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 23
Quick Guide 2
4-track mode basic operation
ZOOM H4
24
the recording level is too high, the sound will be
distorted.
NOTE
In 4-track mode, the auto gain function is not
available.
7.
To terminate the recording level
setting, press the jog dial.
The recording level is now set. The fader icon
disappears and the cursor appears again.
8.
If you have selected two input
sources (IN1&2), repeat steps 4 – 7 to
adjust the recording level for the
other source.
9.
To return to the 4-track mode top
screen, repeatedly press the center
of the [MENU] key.
Selecting an effect patch
In 4-track mode, the signal can be processed by
the preamp and modulation effects before being
recorded on the track.
A collection of effect settings in 4-track mode is
referred to as a “patch” which can be stored. The
H4 has a total capacity for 60 patches, of which
50 are already preprogrammed at the factory.
This section describes how to select a stored
patch.
NOTE
In the default condition, the effect section is set to
off in 4-track mode.
1.
At the 4-track mode top screen,
press the bottom (INPUT MENU) of
the [MENU] key.
The INPUT menu appears.
2.
Bring the cursor to the “EFFECT”
item and press the jog dial.
The screen for selecting effect patches appears.
When a project is in the default condition, the
effect section is off. (In this condition, the ON/
OFF button at the bottom of the display shows
“ON” because it will turn the effect section on
when clicked.)
3.
Verify that the cursor is on the ON/
OFF button and press the jog dial.
The effect section is activated. (The ON/OFF
button at the bottom of the display now shows
“OFF” because it will turn the effect section off
when clicked.) The currently selected patch
number and patch name are shown in the center
of the display.
4.
Bring the cursor to the patch
number/patch name indication and
press the jog dial.
The patch selection can now be changed.
5.
Move the jog dial up/down to select
the patch, and then press the jog dial.
To select the patch while monitoring the sound,
press the TRACK key for the track you want to
monitor so that the key is lit up in red and is set
ON/OFF
button
Currently selected patch number/patch name
H4_E.book 24 ページ 2006年9月1日 金曜日 午後7時56分
Seitenansicht 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare