Zoom Handy Recorder H4 Spezifikationen Seite 51

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 50
4-Track Mode
ZOOM H4
51
To select two stereo linked tracks
In the case of two tracks for which stereo link
is enabled, the TRACK keys are also linked.
Press either TRACK [1] or [2] or TRACK [3]
or [4] repeatedly, until the key is lit in red.
The other key will also light up, and both
tracks are selected as recording targets.
The display shows the track number as 1/2 or
3/4.
In either case, the signal flow is as follows,
depending on whether the source is mono or
stereo.
Single input source
The same signal is sent to both tracks.
Two input sources
The signal from input source 1 is sent to the
odd-numbered track, and the signal from
input source 2 to the even-numbered track.
HINT
To use both tracks as a stereo track, you should
enable stereo link (
p. 53). When recording on a
stereo track, a stereo file is created.
Using the monitor function
To monitor the input signal in 4-track mode, you
normally have to press one of the TRACK [1] –
[4] keys so that the key is lit in red and the track
is selected as recording target, or bring up the
screen for adjusting the recording level.
Alternatively, you can set the monitor function to
ON on the INPUT menu. In this case, the input
signal will always be monitored.
To turn the monitor function on, proceed as
follows.
1.
At the 4-track mode top screen,
press the bottom of the [MENU] key.
The INPUT menu for making various input
related settings appears.
2.
Move the jog dial up/down to bring
the cursor to "MONITOR". Then
press the jog dial.
You can now switch the monitor function on or
off.
3.
Move the jog dial up/down to display
"ON". Then press the jog dial.
The monitor function is now enabled.
4.
To return to the 4-track mode top
screen, repeatedly press the center
of the [MENU] key.
4-track mixing (volume/panning)
When performing playback in 4-track mode, you
can freely adjust the volume (level) and panning
(left/right positioning). Especially with the
bouncing function, it is important to get the
mixing balance between the 4 tracks right and to
establish proper positioning.
Input source: mono
Input
Track 1 or 3
Track 2 or 4
Recorder
Track 1 or 3
Track 2 or 4
Input source: stereo
Input 1
Input 2
Recorder
H4_E.book 51 ページ 2006年9月1日 金曜日 午後7時56分
Seitenansicht 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare