Zoom 8080 Spezifikationen PDF herunterladen (Seite 64)

Strictly speaking, this module is not an effect module, but it serves for setting various parameters for the CONTROL

pedals and CONTROL switches. It also contains settings for the seamless function, for editing patch names and for other

parameters that affect all patches. The module has five pages which are switched with the UTILITY/PAGE key.

Determines whether the EFF2 and EFF3 modules are connected in series or parallel.

The seamless function lets the reverb or delay sound from the previous effect linger on when you switch effects, creating a

smooth transition without audible breaks.

Page 3: Seamless function settings

Page 2: CONTROL pedal and CONTROL switch settings

Page 1: Serial connection/parallel connection

63 ■

Effect Types and Parameters

COMP EFF1 DIST EQ EFF2 EFF3 DLY REV TOTAL

TOTAL Module

Pressing the TYPE - key selects serial connection. "→" appears on the display.

Pressing the TYPE + key selects parallel connection. "｜｜" appears on the display.

q CSW (Control Switch) Sets the CONTROL switch module function.

OFF, CMP, EF1,

DST, VOL,EF2,

EF3, DLY, REV

w CP1 (Control Pedal 1) Sets the CONTROL pedal 1 module function.

OFF, CMP, EF1,

DST,VOL, EF2,

EF3, DLY, REV

e CP2 (Control Pedal 2) Sets the CONTROL pedal 2 module function.

OFF, CMP, EF1,

DST,VOL, EF2,

EF3, DLY, REV

Parameters Comment Values

"VOL" is not the volume of a specific patch but the overall volume.

✎

In principle, the CONTROL switches cannot be used to control the same effect module as CONTROL pedal 1 or CONTROL pedal 2. If several

controllers are set to the same module on this page, priority will be assigned in the order CP1, CP2, CSW when returning to the Play mode.

Only the controller with the highest priority is active and the others are set to "OFF" ( p. 27).

However, if the "CSW" parameter in the RTM page of the DLY module is set to a different item than the "RTM" parameter, the DLY module

can be assigned to CONTROL pedal 1 or 2 and the CONTROL switches at the same time. ( p. 27).

✎

q TIM (SEAM Time) Sets the time until the reverberation subsides, in

100-ms steps.

OFF, 0.1

–

w CUV (SEAM Curve) The reverberation attenuation pattern can be set to

"LNR" (reverberation is cut when the time interval

set with the "TIM" parameter has elapsed) or

"HLD"(reverberation continues for the programmed

duration).

LNR, HLD

Parameters Comment Values

For reverb, the seamless function operates only if reverb in the newly selected module is off. If the programmed reverb time of the

patch is shorter than the time set with the "TIM" parameter, the programmed reverb time has priority.

✎

SERIAL/PARALLEL:

1 EF2 å EF3

SERIAL/PARALLEL:

1 EF2 EF3

PAGE 1

TYPE

–+

TYPE - / + Keys

Serial connection

Parallel connection

MAXMIN

MAXMINMAXMIN

MAXMIN

CONTROL SET: CSW=

2 CP1= CP2=

PAGE 2

MAXMIN

MAXMINMAXMIN

MAXMIN

SEAMLESS FUNCTION:

3 TIM= CUV=

PAGE 3

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom 8080 Spezifikationen Seite 64

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikpedal Zoom 8080