The CONTROL switches can be used with the RTM function to alter parameters in discrete steps. This lets you
easily and quickly adjust distortion or overdrive intensity, flanger speed etc. during a performance.
To use the CONTROL switches for adjusting effect parameters, the following steps are required.
• In the TOTAL module, select the effect module to be assigned to the CONTROL switches.
• If desired, within the selected effect module, select the parameter to be controlled.
■ 26
Advanced Operation
Using the CONTROL switches for RTM
In Play mode, press
the .
The 8080 enters the Edit mode. If
the TOTAL key is not flashing, press
the TOTAL key to select the TOTAL
parameters.
CONTROL SET: CSW=DST
2 CP1=VOL CP2=OFF
CONTROL SET: CSW=EF1
é 2 CP1=VOL CP2=OFF
SERIAL/PARALLEL:
1 EF2 å EF3
For effect types where the RTM destination can be changed (some effect types in effect modules EFF2 and EFF3), the
parameter to be controlled can be selected at the RTM page for that module ( p. 55).
Among the effect types of the DLY module, the RTM page has a
dedicated parameter for the CONTROL switches called "CSW" (CSW
mode select). This allows use of the CONTROL switches separately
from the "RTM" (RTM destination) item ( p. 60).
Kommentare zu diesen Handbüchern