Zoom 8080 Spezifikationen PDF herunterladen (Seite 26)

25 ■

Advanced Operation

Press the

once to

display the RTM

parameter.

Except for the TOTAL and EQ

modules, page 2 of every effect

module includes the RTM

parameter.

"RTM" (RTM destination) stands for

the parameter to be controlled by RTM.

"DIR" (RTM direction) stands for the

direction in which the parameter is to be

controlled.

UTILITY/PAGE key

Use 4 to

select the direction

for the "RTD=" item.

You can select either "NML"

(normal) or "INV" (inverted).

The meaning of "NML" and "INV"

depends on the effect type

controlled by the pedal.

Data entry knob

Use 3 to

select the parameter

(only for effect types

where the RTM

destination can be

selected).

Data entry knob

If desired, store the

patch.

("Storing an edited patch"

p. 23).

Operate

while playing the

instrument.

The selected effect module

parameter changes according to

the pedal movement. In this

example, the compression depth

can be adjusted with the pedal.

CONTROL pedal 2 can be assigned

in the same way.

CONTROL pedal 1

CONTROL

PEDAL

FLG

é RTM=SPD DIR=NML

FLG

é RTM=FB DIR=NML

For effect types where the RTM destination can be

changed (some effect types in effect modules EFF2 and

EFF3), the indication "RTM=" is shown on the display,

and data entry knob 3 can be used to select the

parameter. For effect types where the RTM destination is

fixed, "RTM

→" is shown on the display.

The "Minimum" value of the DIST module depends on the

distortion type and the parameter setting value.

In Play mode, the

lower line of the

display shows the

modules assigned to

CONTROL pedals 1

and 2.

In principle, CONTROL pedal 1, CONTROL pedal 2, and

the CONTROL switches cannot be used to control the

same effect module. If an attempt is made to assign

several controllers to the same module in step 3 (TOTAL

module setting), priority will automatically be set in the

order CP1, CP2, CSW.

TOTAL module setting Play mode display

The minimum value of the distortion gain control varies

according to the type of distortion and the parameter settings.

The minimum value achieved by these changes may be smaller

than Gain 1, depending on the settings.

HINTHINT

01 8080LEAD LVL=100

AMP ¡EF2 ™OFF ßHLD

CP1 setting CP2 setting

Controlling VIB (Vintage Vibe) and PPIT (Pedal Pitch Shifter) with the pedals

Pedal released Pedal depressed

NML Minimum Maximum

INV Maximum Minimum

Controlling effect types of DIST effect module with the pedals

Pedal released Pedal depressed

NML ( Minimum value for setting) Preset parameter value

INV Preset parameter value ( Minimum value for setting)

Controlling other effect types with the pedal

Pedal released Pedal depressed

NML Minimum Preset parameter value

INV Preset parameter value Maximum

✎

CONTROL SET: CSW=DLY

é 2 CP1=DST CP2=DST

If the same module was

assigned to CP1 and CP2 ...

01 8080LEAD LVL=100

AMP ¡DST ™OFF ßHLD

CP1 is selected and CP2

becomes "OFF".

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom 8080 Spezifikationen Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikpedal Zoom 8080