Zoom 8080 Spezifikationen PDF herunterladen (Seite 42)

41 ■

Advanced Operation

Connect the device in

the

loop of the 8080

( p. 7).

EXTERNAL

DIST SEND / RETURN jack

Activate the Edit

mode and select

"EXT" (external

distortion) as the

effect type of the DIST

module.

If required, set the

"BST" (booster type),

"SND" (send level),

and "LVL" (signal level

for next module)

parameters.

Store the patch as

required.

When this patch is selected, the

external effect device in the

EXTERNAL DIST SEND/RETURN

loop of the 8080 can be used.

EXT BST=OFF SND=off

LVL= 1 ZNR=off

Controlling an external effect device

MODEL 8080 ZOOM CORPORATION

MADE IN JAPAN/FABRIQUE AU JAPON

Super

SERIAL NO.

INPUT GAIN INPUT

HML

+4dB

–20dB

OUTPUT

PHONES R L/MONO

EXT

CTRL OUT

+4dB

–20dB

DC9V1.0A POWER MIDI OUT

SEND RETURN

EXTERNAL DIST

SEND RETURN

EXTERNAL DIST

EXTERNAL DIST SEND / RETURN jack

Leave the external effect device always turned on and perform simulated on/off switching at the 8080.

When an external effect is selected, but nothing is connected to the RETURN jack, the sound will not be interrupted, because the 8080

internally sends the signal to the next module. However, the EXT module parameters settings will be active, so that the sound may be different

from the sound with the SND parameter set to "off".

✎

This section explains how to use the 8080 for controlling an external effect device or amplifier, and how to use

the Initialize mode to reset the 8080 to the factory default condition.

Other Functions

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom 8080 Spezifikationen Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikpedal Zoom 8080