Cubase LE 4 Installation Guide/ Control Surface Operation Guide
Cubase LE 4 Installation Guide/Control Surface Operation Guide
2
■
Using MIDI IN/OUT connectors
3.
Turn power to the HD8/HD16 on.
4.
Perform the following steps at the HD8/HD16
to select the connection type.
(1) From the main screen, press the [PROJECT/
UTILITY] key and then use the cursor left/right
keys to bring up the indication "SYSTEM" on the
second line of the display.
(2) Press the [ENTER] key.
The display indication changes as follows.
(3) Use the cursor left/right keys to bring up the
indication "CONTROL SURFACE" on the
second line of the display, and press the
[ENTER] key.
This indication shows the currently selected connection type.
(4) Turn the dial to select "USB" (connection via
USB port) or "MIDI I/O" (connection via MIDI IN/
OUT connectors). The remote operation signals
will be sent via the interface selected here.
(5) Press the [EXIT] key repeatedly to return to the
main screen.
To switch the HD8/HD16 to control surface mode, proceed as
follows. Within control surface mode, select "Mackie Control"
as operation mode.
1.
At the main screen of the HD8/HD16, hold
down the [SHIFT] key and press pad 2
(CONTROL SURFACE).
An indication for confirming the switch to control surface
mode appears.
2.
Press the [ENTER] key.
The HD8/HD16 switches to control surface mode.
3.
Press the [FUNCTION] key.
The CTRLR SETUP screen for making control surface mode
settings appears.
4.
Verify that the indication "MODE SELECT" is
shown on the second line of the display, and
press the [ENTER] key.
The control surface mode selection screen appears.
This screen allows selection of two operation modes.
• Generic Remote
This setting serves for controlling Cubase LE in Generic
Remote mode.
NOTE
It is not possible to operate Cubase LE 4 in Generic Remote
mode. Be sure to select Mackie Control mode.
• Mackie Control
With this setting, the HD8/HD16 emulates the operation of a
Mackie Control.
5.
Turn the dial to select "Mackie Control" and
press the [ENTER] key.
HD8/HD16
Computer
MIDI interface
MIDI IN
connector
MIDI OUT
connector
MIDI IN
connector
MIDI OUT
connector
REC UTILITY 4/10
>SYSTEM
SYSTEM 1/7
>FOOT SWITCH
Control Surface
USB
Switching the HD8/HD16 to
control surface mode
Stat:Mute Bank:1
PAN
CTRLR SETUP 1/1
>MODE SELECT
Mode Select
Generic Remote
Kommentare zu diesen Handbüchern