Zoom HD8 Installationsanleitung PDF herunterladen (Seite 15)

Cubase LE Installation Guide/ Control Surface Operation Guide

Cubase LE Installation Guide/Control Surface Operation Guide

For example, pressing the [TRACK PARAMETER] key

repeatedly cycles through the following parameters for

control: SEND1: OnOff → SEND1: Level → SEND2: OnOff

→ SEND2: Level.

3. Turn the parameter knob for the target track

to adjust the parameter.

Also while the HD8/HD16 is in control surface mode, the pad

playing information is output as MIDI messages. In control

surface mode of the HD8/HD16, the following pad settings are

possible.

When you switch the pad bank in control surface mode, the set

of note numbers assigned to each bank changes. (For

information on MIDI note numbers for each pad, see page 205

of the Operation Manual.)

1. Hold down the [SHIFT] key and press pad 5

(CHORUS/DELAY).

The display indication changes as follows.

2. Turn the dial to select the pad bank (1 - 3).

When the setting is complete, press the [EXIT] key.

You can adjust the volume that is produced according to the

force with which you hit the pads (pad sensitivity).

1. Hold down the [SHIFT] key and press pad 1

(CD-R/RW).

The display indication changes as follows.

For information on available settings, see page 125 of the

Operation Manual.

2. Turn the dial to select the pad sensitivity

settings.

When the setting is complete, press the [EXIT] key to return to

the previous screen.

To set the channel for sending MIDI messages, proceed as

follows.

1. Hold down the [SHIFT] key and press pad 6

(REVERB).

The display indication changes as follows.

2. Turn the dial to select the MIDI channel

(1 - 16).

When the setting is complete, press the [EXIT] key to return to

the previous screen.

Using the pads

Switching the pad bank

Pad bank number

Pad Bank

Changing the pad sensitivity

Setting the MIDI channel

Pad sensitivity setting

Pad Sense

Normal

MIDI channel

MIDI Pad Channel

10ch

HD8/HD16 key Display indication Cubase LE parameter

Parameters accessible through repeated

keypresses

[TRACK PARAMETER] key

SEND1

–

SEND4

SEND1 – SEND4 SEND1 – 4 On/Off status and level are shown in turn.

[INPUT SOURCE] key

PAN

PAN --

[BOUNCE] key

EQ1

EQ:LOW EQ1 OnOff status, Gain, Freq and Q are shown in turn

[SCENE] key

EQ2

EQ:LO MID EQ1 OnOff status, Gain, Freq and Q are shown in turn

[AUTO PUNCH IN/OUT] key

EQ3

EQ:HI MID EQ1 OnOff status, Gain, Freq, and Q are shown in turn

[A-B REPEAT] key

EQ4

EQ:HI EQ1 OnOff status, Gain, Freq, and Q are shown in turn

1 2 ... 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom HD8 Installationsanleitung Seite 15

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Zoom HD8