Zoom V3 9232 Bedienungsanleitung

1 DS-7204HVI-S Series Net DVR User Manual (V2.0) Thank you for purchasing Hikvision Net DVR. This manual applies to DS-7204HVI-S Series Net

10 Table 3.2 Instruction of IR remote control Index Name Description 1 POWER Turnoff device. 2 DEV Enable IR remote control. 3 Numeric Keys Same as

11 Stop using IR remote control When DVR controlled by IR remote control, press [DEV] key again, then the IR remote control can not control this DVR.

12 Alarms Select Alarm In & Alarm Type Alarm Handling & policy & PTZ linkage Alarm out & time Exceptions PTZ Select Camera Bau

13 There is one small frame named “Active Frame”. It can be moved from one item to another by using direction keys ([↑][↓]). When the “Active Frame”

14 How to exit menu Press [ESC] key to exit menu and return to preview mode.

15 3.4 Input Text In the menu interface, if in edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status

16 Chapter4 Basic Operation Guide 4.1 Power on Note: Please make sure that the power supply matches DVR and AC adapter is connected correctly.

17 Table 4.1 Camera record Status Icon Icon Color Status Description White No video signal Yellow Video input Pink Manual recording Green Real

18 Green No alarm Blue Motion alarm Red External alarm Press numeric keys to switch individual camera preview in SHIFT mode. For examp

19 4.3 Video Spot Output Make sure that the numeric button is in “function” mode (the status lamp is off) Press [shift] button to switch

2 Index Chapter1 Product Introduction... 4 1.1

20 Modify password For those users created by admin, they can modify their passwords as follows: Step1: Enter main menu Press [MENU] key, in the log

21 Fig. 4.6 Modify user’s password Step 3: Input new password Use numeric keys to input new password. The password can be null. It also can be 16 n

22 Fig. 4.7 PTZ Control interface The position where current camera name displays can be user-defined. Select channel In PTZ control mode, you can

23 In PTZ control mode, press [PLAY/AUTO] key to start PTZ auto function. Press [PLAY/AUTO] key again to stop. When PTZ is in auto mode, if you exit

24 4.6 Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD has been formatted already. Manual record In preview

25 PTZ control mode. 4.7 Playback Note: The user must have “Playback” right. Playback interface In preview mode, press [PLAY] key, in the pop-up

26 Backup Devices: You can select USB flash, USB HDD, USB CD/DVD-R/W to backup the files or clips. Copy: Start to backup. Backup Today: Backup all re

27 as Fig.4.11 below. Fig. 4.11 Play back control bar There is an additional bar appears. We call it control bar. Control bar descriptions: :

28 4.8 Backup Recorded Files Note: The user must have “Playback” right. Please connect the backup devices before you start to backup.

29 Fig. 4.12 Playback list Step 3: Select backup device Please confirm the backup device: USB flash memory, USB HDD, USB R/W and select the corr

3 6.1 Restore Parameters ... 67 6.2 Upgrade ..

30 Chapter5 Parameters Setup Guide Only the users who have “Parameters Setup” right need to read this chapter. When the following parame

31 Fig. 5.2 User management In the user name list box, only “admin” is existed. You can use [→] key, move “Active Frame” to

32 5.2 Add and Delete User Enter “User Management” interface. Add user The steps are following: Step 1: Enter “User Management” menu as Fig.5.4 b

33 Step 3: Setup the password for new user After you add one new user, the password is null. You can skip this step if you do not want to cha

34 Local rights are for local operation, such as the operation using front panel, IR remote control and RS-485 interface. PTZ control: Locally cont

35 Fig. 5.7 Delete user 5.3 Unit Name and Device ID Unit name Enter “Utilities”  “System Info” and “Unit Name” will be seen as Fig.5

36 Device ID: Fig. 5.9 Display menu When using IR remote control to operate DVR, you must use device ID to select DVR. The default device ID of DVR

37 5.4 Video Output Standard Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect wi

38 5.5 Camera name and OSD Setup Camera Name In “Camera” menu, you can define name for each camera. Please notice that camera’s name can

39 includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera nam

4 Chapter1 Product Introduction 1.1 Overview DS-7204HVI-S series network digital video recorder is an excellent digital surveillance produ

40 Fig. 5.12 Set Positions of Data & Time

41 5.6 Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust

42 5.7 Mask Area Setup In some cases, maybe you want to mask the sensitive area. This area will not be previewed and recorded. The mask area setup st

43 Here is the example for mask area function. Shown as Fig.5.15 below. Fig. 5.15 Area masked Disable the mask check box means cancel the mask ar

44 5.8 View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will display warning alarm in the

45 one week. Also you can copy the schedule of one day to other days. Note: Time periods can not be repeated. Please reboot DVR to make

46 5.9 Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DV

47 Step 7: Save all cameras: If you want to setup other cameras, please repeat from step2 to step 6. In “Camera” menu, press “Confirm” key

48 5.10 Motion Detection If you enable this function, when there is motion being detected, DVR will display alarm in the status bar on t

49 Setup multi areas: After you setup one motion area, press [EDIT] key, the yellow pane will appear again, and then you can setup anothe

5 Support video signal loss alarm Support changeable OSD position, support LOGO. Support both variable bit rate and frame rate. Support dual-stream,

50 Note: In order to make the cameras start recording, in “Recording” menu, you must enable recording schedule and set “Rec Type” as “Motion Detec

51 Fig. 5.20 Setup preview mode Step 2: Preview properties: Preview mode: For preview mode item, you can use [↑] [↓] key to select one mode. The DV

52 Fig. 5.21 Recording channel configuration “Recording” menu description: If HDD Full: There are two options: “Overwrite” and “Stop recording”. I

53 MaxPreRecord is to save all data in PreRecord buffer. The PreRecord time is related with bit rate. The lower bit rate, the longer PreRe

54 Step 3: Record type For “Rec Type” item, the options are: All Time, Motion Detect, Alarm, Motion | Alarm, and Motion & Alarm, command. For al

55 order to trigger alarm recording (refer to chapter 5.13). 3) The time periods are between 00:00 and 24:00. 5.13 External Alarm Input and Relay

56 Fig. 5.24 Alarm in handling setup Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the su

57 Move “Active Frame” to “PTZ Linkage” button, press [ENTER] key to enter “PTZ Linkage” setup menu: Shown as Fig.5.25 below. Fig. 5.25 P

58 output time. The delay time options are: 5 Seconds, 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes, 10 Minutes and Manual Sto

59 Fig. 5.27 Exceptions setup Including the following handle methods: Audible Warning: Beeping. Upload to Center: Send exception information to cen

6 Chapter2 Installation Warning: Before you install the DVR, please make sure that the power of DVR is switched off. 2.1 Checking the DVR and Its Ac

60 5.14 Network Parameters If you want to use network to access DVR, you must setup network parameters. Note: If any network parameter is modified

61 Fig. 5.29 Advanced network setup Advanced setup descriptions: Mac: The physical address of the device, which can not be written. NIC type: Def

62 Fig. 5.30 PPPoE setup Example: Use PPPoE function Step 1: Enter “Network”  “Advanced Settings”. Step 2: Select NIC type. Step 3: Input po

63 Fig. 5.31 PTZ parameters setup PTZ menu description Select camera: Select one PTZ camera. RS-485 parameters: Including baud rate, data bit,

64 save 16 sequences. Cruise setup: Cruise is remembering the track of PTZ movement. Please make sure the PTZ you are using can support cruise fun

65 Fig. 5.33 PTZ sequence setup In “Sequence” setup menu, first input the sequence number. The sequence is among 1 --- 16. Each sequenc

66 Fig. 5.34 Cruise setup Press “Rec Cru” button, you will enter “PTZ control” interface. You can start controlling PTZ with direction keys

67 Chapter6 Utilities There are many tools in “Utilities” menu. Including “Default Parameters”, “Firmware”, “Hard Disk”, “Alarm Out”,

68 6.2 Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop

69 Reboot after successfully upgrading, the system will use the new firmware. 6.3 Hard Disk Management Fig. 6.5 Hard Disk setup Check HDD work s

7 2.3 Rear Panel Description Fig. 2.1 DS-7204HVI-S Rear panel Note: Please refer to real product for different models. DS-7204HVI-S ① Video in

70 In “Utilities” menu, press “View Log” to enter “Log” menu: Shown as Fig.6.6 below. Fig. 6.6 View log If you want to view the log based on defa

71 Step 2: For “Major Type” option, select “Alarm” option. For “Minor Type” option, select one of following options: All, External Alarm I

72 Step 5: After finish searching, DVR will list the matched log information. Step 6: Press “Return” button back to “Utilities” menu.

73 6.8 System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Shown as Fig.6.7 below. F

74 Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digic

75 Fig 7.1 Set the user and its rights, as shown in Fig 7.2 Fig 7.2 Click “New User” button, create a user named “target”, set its password. A

76 Fig 7.3 Step 2: Upgrade Enter the “Utilities” menu of the main menu, shown as Fig 7.4 Fig 7.4 Enter the “Firmware” item, shown as

77 Fig 7.6 Input the FTP Server’s IP Address(The IP of the computer where wfp32 runs), as shown in Fig 7.7, and press “Enter” to start upgrading, a

78 After upgrading completed, system needs to reboot, as shown in Fig 7.9. Press “Confirm” to start the reboot or press “Cancel” to reboot later. The

79 Appendix A Mouse Control Function 1. Preview interface Double-click the left key 1. Switch to the channel where the arrow at when viewing single

8 Chapter3 Operating Instructions 3.1 Front Panel Introduction Fig. 3.1 Front panel introduction Table 3.1 Items on front panel Index Type Name

80 Moving The primary grid will be following with the cursor 5. Test input interface Click the left key 1. Pop up soft keyboard 2. Input text 3. Sa

81 Appendix B HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video fil

82 Appendix C DVR Connect Cable Definition 1 RS-485 connect cable made method There are R+, R-, T+, and T- on the RS-485 interf

83 The corresponding relationship of cross cable

84 Appendix D Specifications Model DS-7204HVI-S Video compression H.264 Preview resolution PAL: 704×576 ; NTSC: 704×480 VGA: 1024*768 Playback res

85 Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, “POWER” light in front Pan

86 2) If the circuit board is wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housi

87 Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service f

88 Appendix G Customer Information Card User’s Name Mr./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number of Product S

9 PTZ PREV A SHIFT 2. [SHOT] in PTZ control (adjust preset). 1. Enter PTZ control mode. 2. [IRIS-] in PTZ control. 1. Multiple screens