Zoom CableModem Spezifikationen PDF herunterladen

CABLE MODEM QUICK START

This Quick Start describes how to connect the cable modem to a cable modem

service as an Internet gateway for a computer, wireless router, or other local

Ethernet-capable device.

Package Contents

• Cable modem

• Power cube

• Ethernet RJ-45 cable

• This Quick Start flyer

Before Installing Your Cable Modem

Your cable service provider needs to know your modem's MAC ADDRESS, which

is printed on a label on the bottom of your modem. You can provide this when you

order cable modem service; or if you already ordered service, by calling the cable

company BEFORE installing your modem. You may also be asked for your cable

modem's model name and number, which is ZOOM 5341J. If you need the

modem's serial number, you can find it near the MAC address on the modem's

label.

System Requirements

• You need to connect the cable modem to a cable modem service that uses any

of the popular DOCSIS standards – 3.0, 2.0, or 1.1. If you need to get cable

modem service, please speak with your cable service provider.

• You need to connect a computer, router, or other Ethernet-capable device to

the cable modem using an Ethernet cable. The computer can be a Windows,

Macintosh, or Linux computer. The router must have one or more Ethernet

ports, and may include wireless capability. Instructions for making this

connection are below.

If your cable service provider provided a cable modem starter kit, please continue

below. If you don’t have or choose not to use the cable modem starter kit from

your service provider, go to How to connect to a computer if you don’t have or

choose not to use a cable modem starter kit.

How to connect a computer or router if your cable service

provider provided a cable modem starter kit

Some cable service providers supply a cable modem starter kit that can be useful

when you install your cable modem. The kit may include a coaxial cable for

connecting between a wall jack and your cable modem. (These are also available

at most electronics retailers.) The kit will include instructions, and may also include

a CD with software. If you receive a kit like this, we recommend that you read the

kit’s instructions and use them to install your cable modem. This cable modem is

DOCSIS 3.0 certified by CableLabs, and connects like a normal cable modem.

You will need to plug in the cable modem’s power cube, make sure the modem’s

Power button is ON, connect to cable modem service using a coaxial cable, and

then connect to a computer or router using the included Ethernet cable.

Note: Please refer to the Cable Modem Rear Panel section if you would like to

see a diagram of the back of the cable modem and a description of the

connections.

After you have installed your cable modem and it has synchronized itself with the

cable network, your cable modem can connect your computer to the Internet.

Note: Allow 5 to 30 minutes for the cable modem to connect to the network the

first time because the cable modem must locate and connect to the appropriate

channels for communication. You’ll see the DS (downstream), US (upstream), and

Online modem lights flashing until the Online light stays steady green to signal

success. (Blue US/DS LEDs indicate channel bonding.)

To check that your cable modem is working, open your browser and go to a

familiar Web site to check that the cable modem is working. If it works,

congratulations! Installation is complete. Otherwise, see Troubleshooting Tips

for help.

How to connect to a computer if you don’t have or choose not

to use a cable modem starter kit

1 Plug one end of the Ethernet cable into the modem’s LAN jack and plug the

other end into your computer’s Ethernet jack.

Note: Please refer to the

Cable Modem Rear Panel section if you would like

to see a diagram of the back of the cable modem and a description of the

connections.

2 Connect the modem to a coaxial cable for the cable service. The cable service

is carried on the same cables and connectors as your cable TV service.

¾ You can connect a coaxial cable between an open cable service wall

jack and the cable modem. (If no wall jack is open, you can use a

coaxial T connector.)

¾ Alternatively, there may already be a coaxial cable that is connected

to service and that has an open end for connecting to the cable

modem.

3 Plug the modem’s power cube into an outlet and then into the modem’s

Power jack. Make sure the modem’s Power button is ON. Allow 5 to 30

minutes for the cable modem to connect to the network the first time because

the cable modem must locate and connect to the appropriate channels for

communication. The Link light of the modem should be lit to show the

Ethernet connection. You’ll see the DS (downstream), US (upstream), and

Online modem lights flashing until the Online light stays steady green to

signal success. (Blue US/DS LEDs indicate channel bonding.) If the modem’s

front panel Power, DS (downstream), and US (upstream) lights do not stay on

steady after a reasonable amount of time, please refer to Troubleshooting

Tips.

4 Now that you have installed your Zoom cable modem and it has synchronized

itself with the cable network, your cable modem can connect your computer to

the Internet.

How to connect your cable modem to a router (not a

computer) if you don’t have or choose not to use a cable

modem starter kit

1 The router should not be plugged in or powered up. If it is, unplug it.

2 Plug one end of the Ethernet cable into the modem’s LAN jack and the other

end into the router’s WAN Ethernet jack, typically labelled WAN or Internet.

Note: Please refer to the

Cable Modem Rear Panel section if you would like

to see a diagram of the back of the cable modem and a description of the

connections.

3 Connect the modem to the cable outlet.

¾ You can connect a coaxial cable between an open cable service wall

jack and the cable modem. (If no wall jack is open, you can use a

coaxial T connector.)

¾ Alternatively, there may already be a coaxial cable that is connected

to service and that has an open end for connecting to the cable

modem.

4 Plug the modem’s power cube into an outlet and then into the modem’s

Power jack. Make sure the modem’s Power button is ON. Allow 5 to 30

minutes for the cable modem to connect to the network the first time because

the cable modem must locate and connect to the appropriate channels for

communication.

5 Power-up the router. Make sure the modem’s Power button is ON. Wait for the

router to complete its power-up sequence.

6 The Link light of the modem should be lit to show the Ethernet connection.

You’ll see the DS (downstream), US (upstream), and Online modem lights

flashing until the Online light stays steady green to signal success. (Blue

US/DS LEDs indicate channel bonding.) If the modem’s front panel Power,

DS (downstream), and US (upstream) lights do not stay on steady after a

reasonable amount of time, please refer to Troubleshooting Tips.

7 Follow your router’s instructions for setting up the router and connected

devices.

8 Using a computer connected to the router, open the computer’s browser and

go to a website to check that the connection between your cable modem and

router is working properly. If it works, congratulations! Installation is

complete.

If you have a problem connecting to the router, please try a simpler setup by

connecting the cable modem directly to a PC by following the instructions in

the section How to connect to a computer if you don’t have or choose not

to use a cable modem starter kit.

If the cable modem still doesn’t connect, please refer to Troubleshooting

Tips.

Once the cable modem works properly when connected directly to your

computer, try the following:

¾ First try shutting down and restarting the router; if that doesn’t help,

then try shutting down and restarting each computer connected to

the router. Power cycle your cable modem and allow time for it to

resynchronize with the cable system.

¾ You may also need to check that the DHCP client on the router’s

WAN port is enabled. If you need help, look in your router’s manual

or contact your router manufacturer.

¾ If that does not solve the problem, you may need to contact your

cable service provider and give them the MAC address of the

router’s WAN port.

Cable Modem Rear Panel

LAN Reset RF(Cable) Power ON/OFF

Port Description

Connect your Ethernet cable between this

port and a computer or router.

LAN

Press this button for 5 seconds in the unlikely

event that you need to restore factory default

settings.

Reset

Connect your coaxial cable line to this port.

RF (Cable)

Connect the supplied power cube to this port.

POWER (AC IN)

Push the button in to turn the power ON.

Push the button again to turn the power OFF.

ON/OFF

1 2

Inhaltsverzeichnis

Seite 1 - CABLE MODEM QUICK START

CABLE MODEM QUICK START This Quick Start describes how to connect the cable modem to a cable modem service as an Internet gateway for a computer,

Seite 2 - Troubleshooting Tips

Please note the following: Return of Defective Units 5 Reconnect the coaxial cable TV cable to the back of the cable modem. Please contact your local

Weitere Dokumente für Vernetzung Zoom CableModem

Um das Dokument anzuzeigen Zoom CableModem Bedienungsanleitung

Zoom CableModem Bedienungsanleitung (2 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom CableModem Spezifikationen

Stöbern Sie online oder laden Sie Spezifikationen nach Vernetzung Zoom CableModem herunter. Zoom CableModem Specifications Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Vernetzung Zoom CableModem

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Zoom CableModem