Zoom 4506 Betriebsanweisung PDF herunterladen (Seite 25)

Wireless and Wireless Security Setup

Your 3G Wireless-N Travel Router's default (factory) settings provide no wireless

network security. If you don't want unauthorized wireless access to your network, we

recommend that you enable wireless network security. To do this, you'll need to

configure the router and each device on your network for the level of security that you

want.

Before setting up wireless security you must decide which method to use.

• Use Wi-Fi Protected Setup (WPS) when all of your devices support WPS

security. WPS is easy to configure. Please refer to

WPS Configuration below

for details.

• If you want security without using WPS, you should probably use the Setup

Wizard as described in Chapter 3.

• The manual setup option is also available. Please refer to

Configuring

Wireless Security Manually on page 27.

WPS Configuration

You can automatically configure WPS security using the router's built-in WPS

configuration program on each client device that is part of your wireless network.

Configuration Methods

WPS offers three configuration methods. Choose the method that is compatible with

the hardware and software options available on your router and client device.

Note: WPS configures one client device at a time. Please repeat the configuration

method for each client on your wireless network that supports WPS security.

Method One

Use this method if your router and client devices have a WPS button. This button can

be either a physical button on the unit or a software button in its application.

1 Press the WPS button on your 3G router and hold it in for seven (7) seconds until the

Wireless LED starts blinking rapidly.

Important! The Registrar (the device configuring the WLAN) goes into the WPS

mode and the Enrollee (the device joining the WLAN) then looks for it. You should

always start the Registrar first. By default your 3G Router is configured as a

Registrar.

2 Click or press the WPS button on the client device.

3 Refer to your client device's documentation for further instructions, if necessary.

Chapter 4: Wireless and Wireless Security Setup 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

Keine Kommentare

Zoom 4506 Betriebsanweisung Seite 25