Zoom 4506 Betriebsanweisung PDF herunterladen (Seite 14)

• PPPoE - Choose this type if your ADSL connection uses PPPoE.

•

PPTP - The Point to Point Tunneling Protocol is more common in corporate

environments and most users will not use this setting.

•

L2TP - The Layer 2 Tunneling Protocol is more common in corporate

environments and most users will not use this setting.

•

3G Cellular Modem - Select this if you are using your 3G modem to connect

to the Internet. (If you are using the 3G modem as the backup to a

broadband modem, you'll need to use the Configuration Manager's Advanced

program to configure this setup. Please refer to 3G Failover on

The Basic Setup

Page on page 33.)

If you select Static IP Address, Dynamic IP Address, PPPoE, PPTP, or L2TP

, then the

Ethernet port will be set as the WAN port. Please check with your service provider

before changing the default setting and choosing an alternate.

If you accept the default setting (Cellular Modem), then the Ethernet port is set as the

LAN port.

Configuring the Static IP Address

If your ISP uses Static IP addressing, select the Static IP Address button on the Select

WAN Type menu. The following page opens:

• LAN IP Address

This is the LAN IP Address of your router. Devices behind the router use this

address as their default gateway. Most users will not need to change this

address.

14 3G Wireless-N Travel Router User Guide

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 57 58

Keine Kommentare

Zoom 4506 Betriebsanweisung Seite 14