Zoom GM-200 Spezifikationen PDF herunterladen (Seite 6)

To use the GM-200 for creating various types of sound, perform the following steps.

ZOOM GM-200

Trying Out the GM-200

Use the GAIN control to adjust the distortion

intensity. Because turning up this control not only

increases distortion but also raises the volume level,

use the MASTER LEVEL control as necessary to

adjust the level.

Adjust distortion intensity and

volume

Adjust ZNR (Zoom Noise Reduction)

Use the OUTPUT CHARACTER knob to choose

among the various options, as described on page

8. Make the setting to match the type of system to

which the GM-200 is connected.

Select the output character

Use the AMP SELECT knob to choose the guitar

amplifier type that is simulated by the unit, as

listed on page 9.

Select the amp type

Use the ZNR control to set the threshold for the ZNR circuit that reduces noise

during play pauses. When the control is turned fully to the left, ZNR is off.

Turning the control to the right gradually raises the action threshold. Set the

control to achieve maximum noise reduction without causing the sound to be

cut off unnaturally.

NOTE

The optimum ZNR point will differ for various amp

types and gain settings. Readjust the ZNR control if

you have changed the setting of the AMP SELECT

knob or the GAIN control.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Zoom GM-200 Spezifikationen Seite 6