Zoom GM-200 Spezifikationen PDF herunterladen (Seite 2)

Safety Precautions

In this manual, symbols are used to highlight warnings and

cautions for you to read so that accidents can be prevented.

The meanings of these symbols are as follows:

Please observe the following safety tips and precautions

to ensure hazard-free use of the GM-200.

• Power requirements

Since power consumption of this unit is fairly

high, we recommend the use of an AC adapter

whenever possible. When powering the unit from

a battery, use only an alkaline type.

[AC adapter operation]

• Be sure to use only an AC adapter which

supplies 9 V DC, 300 mA and is equipped with

a "center minus" plug (Zoom AD-0006). The

use of an adapter other than the specified type

may damage the unit and pose a safety hazard.

• Connect the AC adapter only to an AC outlet

that supplies the rated voltage required by the

adapter.

• When disconnecting the AC adapter from the

AC outlet, always grasp the adapter itself and

do not pull at the cable.

• When not using the unit for an extended period,

disconnect the AC adapter from the AC outlet.

[Battery Powered Operation ]

• Use six IEC R6 (size AA) 1.5V batteries

(alkaline).

• The GM-200 cannot be used for recharging.

Pay close attention to the labelling of the

battery to make sure you choose the correct

type.

• When not using the unit for an extended period,

remove the batteries from the unit.

• If battery leakage has occurred, wipe the battery

compartment and the battery terminals carefully

to remove all remnants of battery fluid.

• While using the unit, the battery compartment

cover should be closed.

• Environment

Avoid using your GM-200 in environments where

it will be exposed to:

• Extreme temperature

• High humidity or moisture

• Excessive dust or sand

• Excessive vibration or shock

• Handling

Since the GM-200 is a precision electronic device,

avoid applying excessive force to the switches and

buttons. Also take care not to drop the unit, and do

not subject it to shock or excessive pressure.

•

Alterations

Never open the case of the GM-200 or attempt to

modify the product in any way since this can

result in damage to the unit.

•

Connecting cables and input and

output jacks

You should always turn off the power to the GM-

200 and all other equipment before connecting or

disconnecting any cables. Also make sure to

disconnect all cables and the AC adapter before

moving the GM-200.

Usage Precautions

• Electrical interference

For safety considerations, the GM-200 has been

designed to provide maximum protection against the

emission of electromagnetic radiation from inside the

device, and protection from external interference.

However, equipment that is very susceptible to

interference or that emits powerful electromagnetic

waves should not be placed near the GM-200, as the

possibility of interference cannot be ruled out

entirely.

With any type of digital control device, the GM-200

included, electromagnetic interference can cause

malfunctioning and can corrupt or destroy data. Care

should be taken to minimize the risk of damage.

• Cleaning

Use a soft, dry cloth to clean the GM-200. If

necessary, slightly moisten the cloth. Do not use

abrasive cleanser, wax, or solvents (such as paint

thinner or cleaning alcohol), since these may dull the

finish or damage the surface.

Please keep this manual in a convenient place for

future reference.

ZOOM GM-200

Safety Precautions/Usage Precautions

Warning

Caution

This symbol indicates explanations

about extremely dangerous

matters. If users ignore this symbol

and handle the device the wrong

way, serious injury or death could

result.

This symbol indicates explanations

about dangerous matters. If users

ignore this symbol and handle the

device the wrong way, bodily injury

and damage to the equipment

could result.

Caution

1 2 3 4 5 6 7 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom GM-200 Spezifikationen Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker Zoom GM-200