Zoom R24 Bedienungsanleitung PDF herunterladen (Seite 135)

Troubleshooting

134

Troubleshooting

IfyouthinkthereisaproblemwiththeoperationoftheR24,checkthefollowingtipsrst.

Problems during playback

◆

No sound, or sound is very weak

• Checktheconnectionswiththemonitoring

system and its volume settings.

• Makesurethatstatusindicatorsinthemixer

section are lit green and that their faders are

raised. If a track's indicator is not green, press its

key repeatedly until it lights green.

• Makesurethatthe[MASTER]statuskeyisnotlit

andthatthe[MASTER]faderisraised.

◆

Moving the fader does not affect the volume

• Onchannelsforwhichstereolinkis turnedON,

the fader of the even-numbered channel will have

noeffect.Eitherturnstereolink OFF ( → P20),or

use the fader of the odd-numbered channel in

the pair.

◆

No sound from the input signal, or the

sound is very weak

• MakesurethattheGAIN control for that input is

turned up.

• Checkthatthestatuslightisgreen(playback

enabled)andthatthefaderofthetrackisraised.

◆

An operation does not work and the

message “Stop Recorder” is shown on the

display

• Someoperationsarenotpossiblewhilethe

recorder is operating. Press the STOP key to stop

the recorder and then conduct the operation.

Problems during recording

◆

Cannot record on a track

• Makesurethatyouhaveselectedandenableda

recordable track.

• Checkwhetheryouhaverunoutoffreespaceon

theSDcard(→P102).

• Recordingisnotpossibleiftheprojectis

protected.Eitherset“PROTECT”to“OFF”(→ P87),

or use a different project.

◆

The recorded sound is distorted

• MakesurethattheGAINknobs(inputsensitivity)

and recording levels are not set too high.

• Lower thefaderssothatthe0(dB)indicatorsof

their level meters do not light.

•IftheEQgainofthetrackmixerisset extremely

high, the sound may be audibly distorted even if

thefaderislowered.LowertheEQgaintoamore

suitable value.

• Ifaninserteffectisappliedtoaninput,check

whethertheeffectoutputlevel(patchlevel)

setting is suitable.

Problems with effects

◆

Insert effect cannot be inserted

• Ifusingthe8xCOMPEQalgorithm,theselection

of insert points is limited (→ P81).

◆

Insert effect is not working

• Checkthattheinserteffecticonisshownonthe

display. If it is not shown, press the EFFECT key,

then press the INSERT soft key and set ON/OFF

to On.

• Makesurethattheinserteffectisinsertedinthe

desired location (→ P81)

◆

Send-return effect is not working

• ConrmthattheREV or CHO icon is shown on the

display. If it is not shown, press the EFFECT key,

then press the REVERB or CHORUS soft key and

set ON/OFF to On.

• Makesurethatthesendlevelsforthetracksare

raised (→ P40,80).

Kommentare zu diesen Handbüchern

Keine Kommentare

Zoom R24 Bedienungsanleitung Seite 135

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Musikinstrumente Zoom R24