Zoom R8 Bedienungsanleitung Seite 32

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 31
Recording and playback
32
Re-recording part of a track (punch-in/out)
Punch-in and punch-out allow you to re-record a single part of a recorded file. The point when the
unit switches from playback to recording is the "punch-in" and the point when the unit switches
from recording to playback is the "punch-out."
The
allows both manual punch-in/out using keys on the front panel or a ZOOM FS01
footswitch (sold separately) and automatic punch-in/out in which you designate the punch-in/out
points in advance.
Start Stop
Re-recorded part
NOTE
Punch-in/out overwrites the recording on
the track.
If the track is set to New Take, the track
will be silent before punching in and after
punching out.
If the REC MODE is set to Always New, a
new file will be recorded.
Use the UNDO soft key to cancel the
re-recording.
1
Raise the fader on the track
you want to re-record.
2
Press the status key 1-2
times until lit red.
Lit red: ready to record
Adjust the recording
level and the
GAIN
to
be the same as the
already recorded part.
3
Prepare the track that you want to
punch-in/out
4
Locate to before the punch-in
point.
8
Press to stop playback
(and recording if not yet
stopped).
Unlit
Re-record by punching in and out
Manual punch-in/out
5
Press PLAY to
start playback.
Lit
Perform (not recording)
Press REC to punch-in and
start recording.
Lit
6
Press REC to punch-out, stop
recording and start playback.
Lit Unlit
7
Perform (recording)
You can punch-in/out manually.
During playback, press the REC key
to start re-recording from that point.
Seitenansicht 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare