Zoom H2 Spezifikationen PDF herunterladen (Seite 84)

Other Functions

ZOOM H2

84

Making settings for the key

hold function

To prevent changing settings by mistake while

recording, the H2 incorporates a function that

locks almost all controls. This is called the key

hold function. To enable the function, proceed

as follows.

1.

Set the H2 to the playback or

recording condition.

When the key hold function is enabled, almost

all controls do not operate. Therefore the

selected operation mode will be maintained.

2.

Enable the key hold function.

Press and hold the

4

(MENU) key until the

indication "Key Hold" appears on the display.

When the key hold function is enabled, all

controls except the [POWER] switch, [MIC

GAIN] switch, and

4

(MENU) key have no

effect. If any key is pressed, the indication

shown below will appear for 2 seconds on the

display.

3.

Disable the key hold function.

Press the

4

(MENU) key and hold it until

the indication "Released" appears on the

display.

Updating the system

software

Using an SD card and a computer, it is

possible for the user to update the system

software of the H2. To do this, proceed as

follows.

1.

Download the latest system

software (firmware) from the

ZOOM web site (http://

www.zoom.co.jp).

2.

Copy the system software from

the computer to the SD card.

For information on connecting the H2 to a

computer, see the section "Using the H2 as a

card reader" on page 71.

3.

Bring up the VERSION UP

screen.

Insert the SD card of step 2 into the H2. Then

turn power on while holding down the

1

(PLAY/PAUSE) key.

The following screen appears.

4.

Execute the version upgrading

process.

Use the

3

(REW)/

2

(FF) keys to move the

cursor to "OK" and press the

5

(REC) key.

Current version Version after update

H2-E.fm 84 ページ２００７年７月１１日　水曜日　午後３時１９分

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare