Zoom MRS-1266 Bedienungsanleitung Seite 157

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 192
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 156
Reference [Other Functions]
ZOOM MRS-1266
157
HINT
If the insert effect is being used for the selected signal, the
output will also be processed by the effect.
3.
Press the respective status key or [ON/OFF] key to
select the signal to be output.
Up to two signals can be selected simultaneously (only one
when MASTER, DRUM, BASS, or TR9/10 is selected). To
select two adjacent signals, press two status keys or [ON/
OFF] keys simultaneously.
4.
To return to the main screen, press the [EXIT] key
several times.
In this condition, the selected signal only is output from the
STEREO SUB OUT jack. The output level can be adjusted
with the [STEREO SUB OUT] level control.
HINT
•Pressing the selected status key or [ON/OFF] key once
more turns off the output of the signal.
•To obtain two signals independently, connect a Y cable
(stereo plug x 1 + mono plug x 2) to the STEREO SUB OUT
jack.
Hard disk maintenance
This section describes how to test and restore the integrity of
data on the internal hard disk, how to format the hard disk,
and how to perform other hard disk maintenance functions.
Basic maintenance procedure
The procedure for hard disk maintenance is the same for
most operations. The basic procedure is as follows.
1.
Turn power to the MRS-1266 off. While holding
down the [CLEAR] key, turn power on again.
The MRS-1266 starts up in "ROM utility mode" which
serves for performing special functions.
2.
Press the [MARK] key in the control section.
The indication "ExtFunc Select" appears on the display.
3.
Use the cursor left/right keys to select the desired
command.
The following commands are available.
ScanDisk
Test and repair the integrity of data stored on the internal
hard disk.
Init Fac (Factory Initialize)
Overwrite the operating files on the hard disk. Data created
by the user will not be erased.
Init ALL (All Initialize)
Format the hard disk, and then write the operating files on
there. All existing data will be erased.
4.
Press the [ENTER] key to execute the command.
Subsequent display indications and operation steps differ for
the individual commands. See the respective section below.
Front panel
STEREO SUB OUT jack
To external effect device etc.
ROM UTY
ROM UTY
MRS-1266
MRS-1266
ExtFunc
ExtFunc
Select
Select
å
å
Seitenansicht 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 191 192

Kommentare zu diesen Handbüchern

Keine Kommentare